Eurotron Instruments (UK) Ltd. (‘the Company’) Terms & Conditions of Sale
July 2009 V01
Goods and services are supplied by the Company subject to these terms and conditions (“Terms and Conditions”), which govern the contract exclusively subject only to any additional terms and conditions stated in the Company’s acknowledgement of order. An order is not accepted by the Company, and accordingly there is no contract, until the Company has issued a written acknowledgement of order.
Orders may not be cancelled or rescheduled without the company written consent and are subject to cancellation or reschedule charges determined by the company.
The Customer is responsible for the accuracy of its order, for supplying any information required by the Company to perform the order, and for the accuracy of any such information supplied. Information contained in catalogues, illustrations and similar materials issued by the Company is approximate only; and the Company reserves the right to determine the technical specification of goods required to fulfil the Customer’s order and to make any changes which do not materially affect the quality or performance of goods.
Price and payment
Unless stated otherwise in the Company’s acknowledgement of order, prices are EXWORKS INCOTERMS 2010 and the Customer is additionally liable to pay the transport, packaging and insurance costs of delivery. Prices are exclusive of any applicable value added tax for which the Customer is additionally liable. The Company reserves the right to increase the prices stated in the Company’s acknowledgement of order according to any subsequent increase in the cost of materials, parts. Unless otherwise specified in the Company’s acknowledgement of order, the Company’s invoices are payable at 30 days net from date of the invoice. Customer is prohibited from and shall not set off invoiced amounts or any portion thereof against sums that are due or may become due from Company to Customer, its parent, affiliates, subsidiaries or other divisions or units on separate transactions.
The company will use all reasonable endeavours to effect delivery by the delivery date(s) stated in the contract or in any estimate of delivery time provided by the Company, but time is not of the essence in this regard. In any event, should delivery be delayed by any act, omission or delay on the part of the Customer the Company is entitled to an extension of time.
Company shall not be liable for any delay in production or delivery of goods if such is due to an event outside its reasonable control (“force majeure”), which shall include among other things, failure by suppliers to provide Company parts, services, manuals, or other information necessary to the performance by Company, any acts of any government that would limit the ability for contract performance (including refusal to grant, or suspension of, an export license), fire, earthquake, flood, or any other acts of God; labour strikes or lockouts; riots, civil disobedience, terrorism or war (or imminent threat of same, and material or component shortage).
If the force majeure continues for longer than 90 days, either party may terminate a purchase order and Customer will pay Company for work performed prior to termination and reimburse all reasonable expenses incurred by Company as a result of such termination. If delays in delivery or performance are caused by force majeure or Customer, the date of delivery or performance shall be extended by the period of the delay or as mutually agreed. If Company should default or delay or not deliver product for any other reason, Customer’s sole remedy against Company shall be an option to cancel its purchase order, through written notice to Company.
Risk and Title
Risk of damage to or loss of goods passes to the Customer on delivery. Title in goods does not pass to Customer, and accordingly the Company remains the owner of them, until the Company has received in cash or cleared funds payment in full of the price for the goods; and if Customer is overdue in paying the price the Company may recover the goods or any of them and for that purpose enter the Customer’s premises and, if necessary, detach the goods from other goods or equipment.
Each product supplied by Eurotron Instruments (UK) ltd is warranted to be free from defects in material and workmanship under normal use and service. The warranty period is 12 months or as stated in the manual supplied with each product ( which-ever is longer) and begins with the date of shipment. Defective goods are to be returned transportation prepaid to Company and will be repaired or replaced, at Company’s option, and return-shipped lowest cost, transportation prepaid. Company shall have no further liability to the Customer. No goods will be accepted for return without an authorization number obtained in advance of shipment from Company.
The above warranty is subject to the following conditions:
(i) The Company shall be under no liability in respect of any defect in the goods arising from any drawing, design or specification supplied by the customer.
(ii) The Company shall be under no liability in respect of any defect arising from fair wear and tear, contamination, wilful damage, negligence, incorrect movement, improper installation, neglect, failure to follow Company’s instructions (whether oral or in writing), operation in environmental conditions outside specified safe operating extremes, misuse or modification or repair of the goods without the Company’s approval.
(iii) The Company shall be under no liability in respect of any defect or failure of the goods to operate in accordance with the specifications, illustrations, description and other particulars in the Company’s literature due to the fact that the Customer combines or uses the goods with any incompatible equipment or ancillary products that may be connected to the goods.
Company reserves the right to charge its regular charges if inspection does not disclose a defect within the terms of this warranty. Repaired or replaced equipment shall be warranted for the remainder of the unused warranty term or for 90 days from shipment, whichever is longer. Additional warranty terms for specific goods may apply. The Company does not represent that the goods may not be compromised or circumvented; that the goods will prevent any personal injury or property loss; or that the goods will in all cases provide adequate warning or protection.
Limitation of Liability
In no event shall either party be liable for (1) any indirect, incidental, consequential loss; (2) any loss arising from business interruption; (3) loss of profits; (4) loss of revenue; (5) loss of use of any property or capital; (6) loss of anticipated savings; or (7) loss of data. Neither party shall be liable for any loss or damage where that liability arises as a result of their knowledge (whether actual or otherwise) of the possibility of any such loss or damage.
Company’s liability in respect of any order or otherwise under these Terms and Conditions shall in no case exceed the sales price of the relevant order. These exclusions and limitations on damages shall apply regardless of how the loss or damage may be caused and against any theory of liability, whether based in contract, tort, or otherwise. Company excludes or restricts its liability for all matters in respect of which it is permitted by law to do so.
Customer shall comply with all applicable export control laws and regulations of the United Kingdom and any other country having proper jurisdiction and shall obtain all necessary export licenses in connection with any subsequent export, re-export, transfer and use ofall product, technology and software purchased, licensed, and received from Company.
Customer shall not sell, transfer, export or re-export any Goods or Software for use in activities which involve the design, development, production, use or stockpiling of nuclear, chemical or biological weapons or missiles, nor use the Goods or Software in any facility which engages in activities relating to such weapons or missiles. In addition, the Goods or Software may not be used in connection with any activity involving nuclear fission or fusion, or any use or handling of any nuclear material until Customer, at no expense to the Company, has insurance coverage, indemnities, and waivers of liability, recourse and subrogation, acceptable to the Company and adequate in the Company’s opinion to protect the Company against any type of liability.
Applicable law and jurisdiction
Company and Customer expressly agree that the construction interpretation and performance of these Terms and Conditions and all transactions hereunder shall be governed by English Low
These Terms and Conditions (including those stated on the face hereof) shall constitute the entire agreement of Company and Customer, superseding all prior agreements or understandings, written or oral, and cannot be amended except by mutual writing. Customer may not assign any rights or duties hereunder without Company’s written prior consent. Provisions herein which by their very nature are intended to survive termination, cancellation or completion of Customer’s order after acceptance by Company shall survive such termination, cancellation or completion. No waiver by the Company of any breach by the Customer of the contract is to be considered a waiver of a subsequent breach. The contract is not intended to confer a benefit on any third party and no third party is entitled to enforce any provision of the contract. If any provision of the contract is held to be invalid or unenforceable in whole or in part, the validity of the other provisions of the contract (and, where applicable, the remainder of the provision in question) shall not be affected. Translations of these Terms and Conditions are provided for convenience only and the English version of these Terms and Conditions shall prevail in case of conflict between the different language versions.